Product specifications
WuT 11080
Power Supply 24V / 15W for DIN rail mount
15 Watt DIN rail power supply with 1 TE width
Universal LPS power supply with wide range input 100...240V
W&T Web-IOs are often used in larger quantities at a centralized location. In such situations a common power supply for the devices makes the application much more transparent than would be the case if the devices were powered individually.
If there is no 24V supply available in the installation, this task can be solved elegantly and cost-effectively using the model 11082 15W DIN rail mount power supply, which can be used to power multiple 24V devices from a central location.
The power supply can of course also be used where in addition to the 24V supply for the Web-IO component group power is also needed for supplying the rest of the installation. In this case you only need to ensure that the overall power requirements do not exceed the current capacity of the DIN rail power supply.
Product properties:
15 Watt power supply for DIN rail mount per DIN EN 60715
Compact housing cross-section (similar to a circuit breaker)
allows use of the power supply in building automation control cabinets
Flexible in application:
Generous 100...240V input range
CE Marking and UL Listed
High efficiency: typ. 85%
Large operating temperature range: -20..+60 °C
Compact DIN rail housing: 25 x 93 x 56 mm
Standards-conformal for both office and industrial environments:
Increased noise immunity for industrial areas
Stricter noise emission for residential and commercial areas
Technical data:
- Output power: max. 15W
- Efficiency: typ. 85%
- Input voltage: 85..264VAC, 120..370VDC
- Frequency: 47..63 Hz
- Input current: 0.48A at 230V AC
- Inrush: max. 65A at 230V AC
- No-load losses: <0.5W
- Output voltage: 24V DC (adjustable 21.6..26.4V)
- Tolerance: +/-1%
- Ripple: max. 150mV
- Rated current: 0.63A
- Minimum load: none
- Overcurrent limiter: at 105%...160% of the nominal current
- Short circuit protected: Yes
- Overvoltage protection: Shutdown at 27.6..32.4V, Reset using POWER ON
- Start time: 1000ms at rated load and 230V AC
- Rise time: 50ms at rated load and 230V AC
- Voltage bridging: 70ms at rated load and 230V AC
- Cooling: Convection cooling
- Dielectric strength: In-Out: 3KV AC
- Isolation resistance: In-Out: 100 Mohm at 500VDC
- Operating temperature: -20..60°C, power derating over a range of 50..60°C
- Storage temperature: -40..85°C
- Relative humidity: Operating: 20..90% relative humidity, Storage: 10..95% relative humidity (non-condensing)
- Adapters: 2-pin input, 2-pin output with screw terminals
- MTBF: >1,172,300 hours (per MIL-HDBK-217F at 25° C)
- Merchandise: 2-year manufacturer’s guarantee
- Weight: 85 g
- Dimensions: 25 x 93 x 56 mm
- Approvals: UL, c-UL, TÜV, CB, CE
- Safety: Meets UL 60950-1 / EN60950-1
- EMC: Meets, EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, ENV 50204, EN 61204-3, EN 61000-6-1
- Wiesemann & Theis product -
