Product specifications
TRINAMIC TMC2660C-PA
The TMC2660 provides an integrated motor driver solution for Laboratory Automation, 3D-Printing, Scanners and other automated equipment applications.
The device has an integrated microstepping indexer, the sensorless stall detection technology StallGuard2™ and the sensorless load dependent current control CoolStep™ and is intended to drive a bipolar stepper motor.
The output driver block consists of low RDSon TrenchFET power MOSFETs configured as full H-bridges to drive the motor windings.
The TMC2660 is capable of driving up to 4A of current from each output (with proper heatsinking). TMC2660 is designed for a supply voltage of 9...30V. The device has a SPI interface for configuration and diagnostics and a step and direction interface.
Specifications:
- Product State: active
- Phase Current, peak: 4A
- Phase Current, RMS: 2.8A
- RDSon LS: 63mΩ(1)
- RDSon HS: 95mΩ(2
- No. Axes: 1
- Supported Motor Type: Stepper
- Microstep Resolution: 1...256
- stallGuard2™: yes
- coolStep™: yes
- spreadCycle™: yes
- Logic Supply: 3.3...5V
- Motor Supply: 9...30V
- TRINAMIC Motion Control product -