August 24, 2026
MegiQ is expanding its successful Radiation Measurement System (RMS) with a new 2-axis rotation system for measuring full 3D spherical antenna radiation patterns.
The new system adds elevation rotation to the existing RMS setup, enabling automated measurements over both azimuth and elevation. Full 3D radiation patterns can be measured at 5-degree intervals in as little as 3 minutes, depending on the signal bandwidth.
The RMS supports measurements at multiple frequencies and can characterize both linear polarization (Horizontal and Vertical) and circular polarization (RHCP, LHCP and Axial Ratio).
The new 3D turntable is designed as an add-on to the existing MegiQ RMS. This means current RMS users can upgrade their system for full 3D measurements without replacing their existing equipment.
· Azimuth and elevation minimum step size: 2°
· Azimuth and elevation nominal rotation speed: 20 seconds per rotation
· Azimuth and elevation maximum rotation speed: 2.5 seconds per rotation
· Measurement center height: 130 cm
· Maximum DUT size: 20 × 20 × 100 cm
· Maximum DUT weight: 8 kg
· Boxed table package size: 42 × 42 × 63 cm
Further information
For product information, application support or a discussion about your requirements contact the TOP-team.
Or visit the WoTS booth and learn more.
Or visit the ewNA and learn more.
Back
