Product specifications
FSP2000-52AGPBI
2000W ATX PSU for Multi-GPUs (Mining/GPGPU/AI/Deep Learning) Applications
Introduction:
FSP2000-52AGPBI is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 2000 Watts and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, FSP2000-A0AGPBI comes with 16 PCI-E 6+2 pin connectors, the power supply is ideally the best choice for server, workstation, GPGPU, even the mining machine/AI/deep learning applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
Features:
- 80 Plus Gold
- Input Circuit 100% High Voltage Tested
- Up to 16 x PCI-E 6+2 PIN Connectors
- Full Modular Design, 200mm Length
- Low Ripple & Noise
- Output Over Voltage Protection
- Short Circuit Protection on All Outputs
- Resettable Power Shut Down
- 100% Burn-In Test Under 50℃ High Ambient Temperature
- MTBF: 100K Hours at 25℃ Ambient Temperature
- 100% Hi-Pot Tested Line Input Fuse Protection
General specifications:
- Dimension (L x W x H): 200 x 150 x 86 (mm) / 7.87 x 5.91 x 3.39 (inch)
- Efficiency: 80 Plus Platinum
- Hold-up time: 115V / 60Hz: ≥16ms, 230V / 50Hz:≥16ms
- Operating altitude: 5,000 meters above sea level
Environment:
- Working temperature: 0°C to 50°C
- Storage temperature: -20°C to + 80°C
- Working humidity: 85% RH non-condensing
- Storage humidity: 95% RH non-condensing
- MTBF: 100,000 hours of continuous operation at 25°C, Max. output load
- Applications: Workstation ,Storage System ,IPC Controller
Input specifications:
- Input voltage: 90-264Vac
- Input frequency: 47-63Hz
- Input current: 115Vac @ 6A, 230Vac @ 3A
Output rating:
- Outputs: +3.3V (max. 25A), +5V (max. 25A), +12V (max. 166.6A), -12V (max. 0.5A), +5Vsb (max. 4A)
- FSP Protek Product -
